Views: 463
Videos on Handling & Processing of Powder & Bulk Solids
Operators of industrial facilities who work with combustible solids need to manage the risks of potential dust explosions.
Typically plant components which are at risk are protected by explosion vents. These pressure relief devices relieve a certain area before the vessel is damaged by the explosion.
As well as the pressure, flames and burnt dust are also released.
There is not always enough space outside to release the explosion. Then we recommend the use of the REMBE® TargoVent. The pressure wave and the flame front are targeted in one direction, so that the space in front of the Explosion Vent can be put to better use.
In the event that the plant components, which need to be protected are located inside the building, conventional Explosion Vents are no longer enough.
To prevent secondary explosions inside the building, the use of REMBE® Q-Box is recommended. The REMBE® Q-Box extracts the energy of the explosion and extinguishes it in milliseconds. Accurately specified and correctly installed the Q-Box absorb both the pressure and the flames and also prevent unnecessary consequential costs, like shut downs or maintenance.
This is integrated explosion protection made by REMBE® .
**********
REMBE® Videos
shown on Powder Bulk Videos:
1. REMBE® KUB® –
The most reliable rupture disc
2. REMBE®:
Explosion Safety – Q-Box and TARGO-VENT
3. REMBE®:
Explosion Isolation – REMBE® EXKOP®
4. REMBE®:
Explosion Protection – REMBE® Q-Rohr® & EXKOP® in action
5. REMBE®:
The Original of Flameless Venting – REMBE® Q-ROHR®
**********
Homepage
**********
REMBE Videos
auf dem Schüttgut Videos Portal:
1. REMBE: Explosionsschutz – Q-Box und TARGO-VENT
2. REMBE®: Fachtagungen Explosionsschutz und Druckentlastung
3. REMBE: Flammenlose Druckentlastung mit REMBE® Q-Rohr®
4. Explosionstechnische Entkoppelung – REMBE® EXKOP®
**********
